Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the wordpress-seo domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /var/www/html/wp-includes/functions.php on line 6260 Silky Sun Shield Lotion (SPF 50+) - Happi

Silky Sun Shield Lotion (SPF 50+)

Silky Sun Shield Lotion (SPF 50+)
Ingredients
%

Phase A

  • Deionized water
  • 34.10
  • Dissolvine NA2-S (AkzoNobel) (Disodium EDTA)
  • 0.10
  • Propylene glycol
  • 1.00
  • Pemulen TR-2 polymer (Lubrizol Advanced Materials) (Acrylates/C10-30 alkyl acrylate crosspolymer)
  • 0.40

Phase B

  • Neo Heliopan 357 (Symrise) (Avobenzone)
  • 5.00
  • Neo Heliopan HMS (Symrise) (Homosalate)
  • 8.00
  • Neo Heliopan OS (Symrise) (Ethylhexyl salicylate)
  • 5.00
  • Neo Heliopan 303 (Symrise) (Octocrylene)
  • 6.50
  • Tinosorb S (BASF Care Creations) (Bis-ethylhexyloxphenol methoxphenyl triazine (BEMT)
  • 2.00
  • Uvasorb HEB (3V Sigma S.p.A.) (Diethylhexyl butamino triazone)
  • 1.00
  • Arlacel 165 (Croda Inc) (Glyceryl stearate (and) PEG-100 stearate)
  • 2.50
  • Lanette O (BASF) (Cetearyl alcohol)
  • 1.00
  • Tegin M Pellets (Evonik) (Glyceryl stearate)
  • 0.50
  • Caflon PI AB (Univar USA) (C12-C15 alkyl benzoate)
  • 5.00
  • Cetiol CC (BASF Care Creations (Dicaprylyl carbonate)
  • 3.00
  • Parsol TX (DSM Nutritional) (Titanium dioxide (and) dimethicone (and) silica)
  • 3.00

Phase C

  • Dermacryl E (45% active) (AkzoNobel) (Styrene/acrylates copolymer)
  • 2.20

Phase D

  • TEA (99%) (Merck) (Triethanolamine)
  • 1.20
  • Parsol HS (DSM Nutritional Products) (Phenylbenzimidazole sulfonic acid)
  • 2.50
  • Deionized water
  • 9.00
  • Tinosorb M (BASF) (Methylene bis-benzotriazolyl tetramethylbutylphenol)
  • 3.00
  • Dry-Flo TS Pure starch (AkzoNobel) (Tapioca starch (and) polymethylsilsesquioxane)
  • 2.00
  • Euxyl PE 901 (schülke & mayr) (Phenoxyethanol (and) ethylhexylglycerin
  • 1.00
  • TEA (99%) (Merck) (Triethanolamine)
  • 1.00

Procedure

Sift Pemulen TR-2 slowly into the water and mix until fully dispersed/dissolved (avoid clumping while adding). Add all other ingredients and begin heating to 75-80°C with moderate mixing. In a separate vessel add all ingredients of phase B except Parsol TX and heat to 75-80°C with moderate mixing. Once phase B is melted add Parsol TX to the oil phase. Add phase B to phase A at 75-80°C. Add phase C at 80°C and homogenize for 3 minutes with moderate speed at 75-80°C. Begin cooling batch to 60°C. Add all ingredients of phase D except Tinosorb M and stir until a clear solution is obtained. Add Tinosorb M and add phase D slowly at 60°C to the emulsion while mixing and homogenize for 2 minutes with moderate speed. Add phase E below 40°C under stirring and mixing with moderate homogenization speed at 4000 rpm until dispersed and uniform. Cool down to room temperature. Adjust pH to 7.0-7.5. A homogenization step at the end is recommended.

Properties

pH—7.0-7.5; Color off white—slightly yellow; Viscosity—15000-25000 Brookfield.

More Information

AkzoNobel 800-906-9977 Fax: 908-707-3664 Email: personalcare.usa@akzonobel.com Website: www.akzonobel.com/personalcare